The General Pro Polish™ System is designed for use with popular models of single and dual head, low-speed surface grinders, the Pro Polish™ System produces high-quality, polished surfaces without the need for expensive and complex job-specific, polishing equipment. Designed specifically for use by both contractors or weekend, do-ityourselfers alike on a wide variety of smaller concrete polishing projects. Delivers professional results without the professional investment!

The Pro Polish™ System utilizes a series of seven 12 inch-diameter (305mm) diamond discs which are quickly and easily secured to the grinder head with Velcro fastener. What makes it unique is the matrix chemistry of the resin is formulated to deliver productive results even at the lower rotational speeds commonly found with conventional, low-speed surface grinding equipment. Can be used with popular models of General, EDCO, Stow and MK Diamond surface grinders.

Polishing discs range from 50 to 3000 grit and are color coded to simplify the progression from one disc to the next. Users need only to follow the pad color sequence until the desired results are obtained. Hardeners can be combined with discs, usually 400 grit and higher, to help intensify the brilliance of the floor shine.

The Pro Polish™ System is the simple and cost affordable to solution to many concrete polishing applications

General Equipment Model SG24-2200KIT

• Polishing pads range in composition from 50 to 3,000 grit and are color-coded to simplify the progression from one pad to the next.
• Users need only to follow the pad color sequence until the desired results are obtained.
• Simple operation caters to all types of users, from seasoned contractors to do-it-yourself homeowners.
• Hardeners can be combined with pads, usually 400 grit and higher, to help intensify the brilliance of the floor shine.
• When properly used to maximize service life, the system will polish up to 15,000 square feet of concrete.
• Attaches without removing multi-accessory disc on General SG12 and SG24 Series Surface Grinders

Step-by-Step Polishing Process

• Take off the any existing coatings
• Carefully seal cracks and joints with a filler, concrete sealer, or epoxy.
• Smoothen the surface with a 30 or 40 grit diamond block.
• Whet with an 50 grit metal-bonded diamond.
• Grind with a 150-grit metal-bonded diamond.
• Densify the concrete by applying a chemical hardener.
• Polish the floor with a 100 or 200 grit resin-bond diamond.
• Brighten it with a 400 grit resin-bond diamond.
• Polish with an 800 grit resin-bond diamond.
• Finish with a 1500 or 3000 grit resin-bond diamond.
• Apply a stain guard to protect the polished surface (it makes the floor easier to maintain).