Falltech 12' Choker anchor sling is constructed using standard-duty 1-3/4" polyester webbing sewn in a continuous loop. Wraps around I-beams and other properly rated structural members, passes through itself and cinches down. To be used when sharp edges and abrasive surfaces aren't a concern. Uses a standard D-ring for connection to deceleration device.

Falltech Model No. 7373

• Features 1-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistance
• Appropriately sized alloy steel D-rings provide simple pass-through choke-on installation.
• May be passed-through multiple times to shorten length
• Smaller D-ring facilitates connection point for SRLs and lanyards
• Each D-ring termination features three individual 2" box-stitches for longer life
• Complies with ANSI Z359.18-2017

Specifications

• Webbing: Polyester 5,000 lb min. static strength
• D-rings: Plated alloy steel; 5,000 lb min. static strength
• Wear Pad: 3" Polyester webbing