• Price $725.00
  • Product Code: T11400
  • Quantity in Basket: None
  • Availability In Stock


Note: The PayPal options below are only for this item. If you have added multiple items to your shopping cart you MUST go to your shopping cart to checkout.







Mopping up after flooding is made easy with the model R400D. The Mop-up pump features a unique non-return valve built in below the impeller. The rubber clad bottom helps protect against damage to floor surfaces. Pumping down to 1/12 of an inch and starts up in only a small puddle of liquid, and features a special diaphragm valve that prevents water backflow. Perfect for easy clean up of floods, and spills in basements, businesses, industrial and recreation areas.

BJM Pump Model No. R400D-115

  • Top Discharge: allows for superior cooling of motor and provides a slim line design.
  • Longer Power Cord: Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above.
  • 304SS Motor Housing: Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
  • Three Seal Motor Protection: Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic*. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • More Motor Protection: Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • Tough Pump Construction: Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components*.

Flow Sheet

Tools made in the USA


GENERAL DATA
MAX. FLOW: GPM 50
MAX. HEAD: ft 36'
PUMP TYPE Elec. Submersible, Top Discharge
STRAINER OPENING N/A
DISCHARGE SIZE 2" NPT
WEIGHT 33 lbs

ELECTRICAL/MOTOR DATA
MOTOR RATING: HP 0.5
MOTOR RPM 3450
MOTOR INSULATION CLASS F
MOTOR SERVICE FACTOR 1.1
VOLTAGE 115, 1PH-60Hz
CURRENT F.L.A. 6
MOTOR PROTECTION Thermal Breaker
POWER CORD: GAGE; LENGTH 16/3; 33'
MAXIMUM LIQUID TEMPERATURE 104 F